SQ1 Steam Quality Test Kit

SQ1 Steam Quality Test Kit





SQ1 Steam Quality Test Kit


Steam Quality Test Kit는 cGMP (Orange Guide), HTM 01, HTM 2010: 1994, HTM 2031: 1997, EN 285: 2006, ISO 14937:2000, AAMI ST79, ISPE Baseline Guide for Steam and Water과 PDA Technical Reports No. 1 & 48 - TR1 & TR48.에 규정된 Plant/Utility/Clean/Pure 증기발생기와 증기배관 시스템 그리고 고압증기 멸균기로 공급되는 증기의 품질을 확인하기 위한 장치입니다.

시험항목

불 응축가스 시험 Non-Condensable Gas Test
증기 건조도 시험 Dryness Value Test
과열증기 시험 Superheat Test

고압증기를 배관으로부터 채취하는 Test Elbow의 종류에 따라 세가지 버전을 공급합니다.


버전 특징 제품번호 설명
SQ1 Pharma SQ1P ½" tri-clamp (tri-clover) 연결로 증기배관에 설치,
주로 Clean/Pure Steam Pipework System에 Tri-Clamp를 사용하여 연결
SQ1 Standard SQ1T ¼" BSP (or NPT for US) Threaded Connection으로 증기배관에 설치,
주로 Plant Steam 배관이나 Threaded 파이프 배관에 연결.
SQ1 Fedagari SQ1F Fedegari 멸균기를 위해 특별 제작됨. ½"sanitary flanges로 증기배관에 연결

SQ1P Test Elbow



SQ1 Pharma의 Standard Test Elbow Size: ½", ¾", 1", 1 ½", 2", 3" and 4" Diameter 이외의 사이즈는 주문에 의해 제작 됩니다.
SQ1P Test Elbow는 재질성적서(Material Certificate), 용접과 용접기능사 성적서(Weld and Personnel Certificate)가 함께 제공됩니다.

Steam Quality Test Kit의 구성

 non-condensable gas test condenser
 submersible cooling water pump & pipes - to allow testing to be carried out at remote locations without a local cooling water supply
 insulated steam connection pipe
 burette, tap & rubber filler
 250 ml measuring cylinder
 three pitot tubes (0.4, 0.6 & 0.8 mm dia.)
 superheat expansion tube with insulation
 Dryness test bung with stainless steel dip tubes
 connection tube and clips
 1 litre stainless steel vacuum flask
 detailed instruction manual and procedures/calculations and report forms in Excel
 robust carrying case


Steam Quality Test Kit의 Brochure와 관련 기술자료

Test Elbow Specification
Installation of Sample Points
SQ1 Superheat Test 계산식
Steam Quality Test Kit 와 Accessory의 Brochure

SQ1 Manual(한글)
SQ1 Manual(영문)